|
Home  Tools & Equipment Flexible Shafts, Handpieces, Accessories and Spare Parts Spare Parts |
|
|
Replacement foot pedal for the Foredom Asia FA-2 Motor.
| |
Code |
Price ex. GST |
|
| |
MO3943 |
$80.00 |
 | |
|
 |
Pair of motor brushes for these older foredom models:
1/8 HP Series SR, SRM, and SRB motors (not the current 1/6 HP models).
1/8HP Series S, SM, and SB motors.
1/4 HP Series H, HM, and HB motors.
Series K motors.
Brushes should be checked for wear periodically. When new they are approximately 5/8" long. Replace them when they have worn to 1/4". Be sure to replace both motor brushes even if one of them is less worn than the other.
Learn More About Motor Brushes:
All Foredom electric motors are the 2-pole type, and use one set of brushes, one on each side of the motor case, opposite the shaft end. The brushes are installed in brush holders, which are copper or brass tubes encased in plastic, with shallow plastic screw caps to retain, and provide access to, the brushes. The leads from the motor power cord are connected to the metal brush tubes, from which current flows into the brushes. A brush consists principally of a length of compressed graphite, with carefully controlled characteristics to provide the lowest possible resistance, low friction, and long life. A flexible copper pigtail is imbedded in the brush, terminated in a U or disc terminal. The pigtail is surrounded by a coil spring. The free end of the brush is curved, to match the curvature of the commutator. When the brush is inserted in the brush holder and the screw cap is in place, the spring maintains proper brush pressure on the commutator as the brush wears, and the pigtail terminal contacts the inner metal tube to provide a current path to the brush.
| |
Code |
Price ex. GST |
|
| |
MO3920 |
$19.00 |
| |
|
 |
Foredom Chuck Key - large handle
| |
Code |
Price ex. GST |
|
| |
MO3970 |
$23.00 |
| |
|
 |
Foredom Flexi-Shaft Grease.
The flexible inner shaft should be checked, wiped clean, and relubricated with grease every 50 hours of use. With every 200 hours of use, the shaft should be thoroughly cleaned with solvent and lubricated. Instructions for lubrication are detailed in your machine’s Owner’s Manual |
 |
Foredom Motor Connector Plastic.
Motor connector (light gray connector piece between motor and shaft/sheath) for nearly ALL motors with key tip shafts, not Series EE.
| |
Code |
Price ex. GST |
|
| |
MO3950 |
$8.00 |
| |
|
 |
Replacement trigger switch for C.FCT-2, C.SCT-2, C.FCH-2, C.TXR-2, C.SXR-2 and C.SCH-2 foot operated speed controls (230 volt).
Replace the trigger switch if your speed controller behaves erratically or will only operate at maximum speed.
Includes wiring diagram for supported pedals.
Please refer repair to a licensed technician or electrician.
| |
Code |
Price ex. GST |
|
| |
MO3900 |
$35.00 |
| |
|
 |
Spare Part - Foredom #52 Handpiece Front Collet
| |
Code |
Price ex. GST |
|
| |
SP5262 |
$60.00 |
| |
|
 |
Spare Part - Foredom #52 Handpiece Rear Collet
| |
Code |
Price ex. GST |
|
| |
SP5263 |
$40.00 |
| |
|
 |
Spare Part - Foredom Duplex Slotted Shaft Connector
| |
Code |
Price ex. GST |
|
| |
SP46 |
$10.00 |
| |
|
 |
Foredom Foot Control FCH-2.
For current SR, SRB, SRH and SRBH motors.
| |
Code |
Price ex. GST |
|
| |
MO3620 |
$125.00 |
| |
|
 |
Foredom Foot Control FCT-2.
For use with these Discontinued 230 Volt Motors: Series CC and DD, Series L and LB, Series F, Series PG and 1/8 Horsepower Series S, SB, SR and SRB motors.
| |
Code |
Price ex. GST |
|
| |
MO3600 |
$120.00 |
| |
|
 |
Pair of motor brushes for current 1/6 HP M.SR, M.SRM, and M.SRB reversing motors. Also for current M.SRH, M.SRMH and M.SRBH heavy duty reversing motors.
This is the current motor that has been in production since Nov. 2005. Earlier models of Series SR motors are 1/8HP and use different brushes (MP2019P).
Brushes should be checked for wear periodically. When new they are approximately 3/4" long. Replace them when they have worn to 1/4". Be sure to replace both motor brushes even if one of them is less worn than the other.
More Details About Motor Brushes:
All Foredom electric motors are the 2-pole type, and use one set of brushes, one on each side of the motor case, opposite the shaft end. The brushes are installed in brush holders, which are copper or brass tubes encased in plastic, with shallow plastic screw caps to retain, and provide access to, the brushes. The leads from the motor power cord are connected to the metal brush tubes, from which current flows into the brushes. A brush consists principally of a length of compressed graphite, with carefully controlled characteristics to provide the lowest possible resistance, low friction, and long life. A flexible copper pigtail is embedded in the brush, terminated in a U or disc terminal. The pigtail is surrounded by a coil spring. The free end of the brush is curved, to match the curvature of the commutator. When the brush is inserted in the brush holder and the screw cap is in place, the spring maintains proper brush pressure on the commutator as the brush wears, and the pigtail terminal contacts the inner metal tube to provide a current path to the brush.
| |
Code |
Price ex. GST |
|
| |
MO107021 |
$22.50 |
| |
|
 |
Foredom Brush Cap.
| |
Code | | Fits | | Quantity |
Price ex. GST |
|
| |
SP5233 | | Current SR motor | | Single Cap |
$3.50 |
| |
| |
SP120 | | Old Motors Only | | Single Cap |
$11.50 |
| |
|
Carbon brush for CDG 18000 and 25000.
Sold as Singles, please order 2 for a pair.
| |
Code | | Pack Quantity |
Price ex. GST |
|
| |
SP270/80B | | Single Brush |
$6.00 |
| |
|
Carbon Brush Foredom Asia.
Only for MO3942 Foredom Asia Pendant Motor.
| |
Code | | Pack Quantity |
Price ex. GST |
|
| |
SP001/20 | | Pair |
$15.00 |
| |
|
 |
36-1/4" long, standard material outer sheath.
Use with S-93 key tip inner shafts sold separately.
| |
Code |
Price ex. GST |
|
| |
MO3930 |
$75.00 |
| |
|
 |
This 39" long inner shaft comes installed and should be used to replace broken or worn shafts on these motors:
M.SR, M.SRM, M.SRB
M.TX, M.TXM, M.TXB
M.LX, M.LXM, M.LXB
Use with outer sheaths sold separately.
Replacement shafts require a VERY light coating of Foredom grease before use. Be sure to UNPLUG your motor before doing any maintenance and NEVER operate your Foredom with the outer sheath removed.
| |
Code |
Price ex. GST |
|
| |
MO3940 |
$35.00 |
| |
|
|
|
|
