No weight indicates option is not available.
**Please note STG minimum 100mm length**
**Please note STG minimum 100mm length**
Round Profile
| ROUND approximate weights per 500mm length **Please note STG minimum 100mm** | |||||||
| O.D. (mm) | I.D. (mm) | WALL (mm) | PLATINUM 950 | 18ct YELLOW | 18ct WHITE M | 9ct YELLOW | STG SILVER |
| 12.0 | 10.0 | 1.0 | 179.7 | ||||
| 10.0 | 8.0 | 1.0 | 147.1 | ||||
| 10.0 | 9.0 | 0.5 | 77.6 | ||||
| 8.0 | 6.0 | 1.0 | 114.4 | ||||
| 8.0 | 7.0 | 0.5 | 61.3 | ||||
| 7.0 | 5.0 | 1.0 | 145.2 | ||||
| 6.0 | 4.0 | 1.0 | 121.0 | 124.1 | 81.7 | ||
| 6.0 | 5.0 | 0.5 | 87.7 | 66.5 | 68.3 | 48.1 | 45.0 |
| 5.0 | 3.0 | 1.0 | 96.8 | 99.3 | |||
| 5.0 | 4.0 | 0.5 | 71.8 | 54.5 | 55.9 | 39.4 | 36.8 |
| 4.0 | 2.0 | 1.0 | 72.6 | 76.8 | |||
| 4.0 | 3.0 | 0.5 | 55.8 | 42.4 | 43.5 | 30.6 | 28.6 |
| 3.0 | 2.0 | 0.5 | 39.9 | 30.3 | 31.1 | 21.9 | 20.4 |
| 2.0 | 1.0 | 0.5 | 23.9 | 18.2 | 18.6 | 13.1 | 12.3 |
| 1.5 | 0.9 | 0.3 | 8.7 | 9.0 | 6.3 | 5.9 | |
Square Profile
| SQUARE approximate weights per 500mm length **Please note STG minimum 100mm** | |||||||
| O.D. (mm) | I.D. (mm) | WALL (mm) | PLATINUM 950 | 18ct YELLOW | 18ct WHITE M | 9ct YELLOW | STG SILVER |
| 6.0 | 5.0 | 0.5 | 84.7 | 86.9 | 57.2 | ||
| 5.0 | 4.0 | 0.5 | 69.3 | 71.1 | 46.8 | ||
| 4.0 | 3.0 | 0.5 | 53.9 | 55.3 | 36.4 | ||
| 3.0 | 2.0 | 0.5 | 38.5 | 39.5 | 26.0 | ||
How to estimate
The above table has the weight per 500mm stock piece. Divide the weight above by 500 and multiply by your desired length to get the approximate cut weight.
How to order
We are developing online estimation and ordering of fabricated metal products. Until this is complete, please continue to manually order:
- Estimate the weight of your order before placing it as detailed above.
- When you are ready to order, please either
- contact us using the contact form giving the chenier size, and length of the piece in millimetres.
- when placing a tools order use the Other Requirements to detail your metal requirement - see below.
- or alternately send us an email on info@regal.co.nz with your full requirements.
- We will cut and weigh the metal. Metal pricing is our list pricing at the time of invoicing.
Cutting charges will apply for multiple pieces cut from the same base stock.
To Order with tools
While we develop the online estimation and ordering system, please continue to use the Other Requirements field on checkout to put the Tube Chenier that you wish to order.
