Categories
- Gold and Silver
-
Tools & Equipment
-
Abrasives
- Assorted Miniature Mandrels
- Carborundum Files
- Cratex Abrasives
- Deburring, Satin Finish and Flap Wheels
- Diamond Wheels
- Emery or Sanding sticks
- Emery Paper and Sandpaper
- Garryflex Blocks
- Hard Arkansas Stones
- India Stone
- Mizzy Heatless Grinding Wheels
- Moores and Magnum Sanding Discs
- No-Lap Bands
- Polishing Pins and Points
- Powdered Abrasives
- Pumice Wheels
- Radial Bristle Disc
- Ruby Stone Abrasives
- Sanding Sponges
- Santaper Sticks & Belts
- Shells-Sangers Paper
- Silicon Carbide Separating Discs and Cut-Off Wheels
- Silicone Rubber Abrasives
- Wooden Ring Mandrels
- Wooden Split Mandrels
- Adhesives
- Anvils, Bench Blocks & Stakes
-
Beading
- Beading Reamers (Diamond and metal)
- Beading Trays and Boards
- Brooch Backs, Butterflies and Cufflinks
- Cords, Wires, Thread and Needles
- Crimps and Crimping Tools
- Easy Knotting
- Head Pins and Gallery Wire
- Jumpring and Earwire Making and Jigs
- Kumihimo Braiding Disk/Plates
- Miscellaneous Beading Tools
- Rivet Tools, Rivets and Eyelets
- Benches & Bench Accessories
- Books
- Brushes
-
Buffs & Felts
- Berry Buffs
- Yellow Buffs
- Blue Buffs
- Orange Buffs
- Muslin Buffs
- Miniature Buffs
- Full-Sized Felt Buffs
- Felt Inside Ring Buffs
- Buffs and Felts for Bracelets and Bangles
- Large Felt Cones (Pointed and Round)
- Unmounted Miniature Felts
- Mounted Miniature / Midget Felt Buffs
- Hand Buffs
- Miscellaneous Buffs & Accessories
- Burs, Drillbits and Accessories
- Casting Supplies and Equipment
- Cleaners & Supplies
- Copper, Brass and Steel Wire
- Diamond Supplies
- Engraving Equipment & Supplies
- Files & Accessories
- Flexible Shafts & Accessories
- GRS tools and BenchMate Systems
- Hammers & Mallets
- Kits
- Magnifiers & Optical
- Measuring
-
Metal Forming & Decorating
- Jumpring Mandrels
- Sinusoidal Stakes
- Spoon Stakes Set of Four Shaping Tools
- Wooden Forming Tools
- Vertical Ring Stretcher
- Swage Blocks
- Scribers, Scrapers and Burnishers
- Ring Roller Stretcher For Stone Set Rings
- Ring Bender
- Ring And Bezel Mandrels
- Centre Punches
- Pitch Bowl and Chasing tool Sets
- Necklace Mandrels - Busts
- Doming/Dapping Punches
- Doming/Dapping Blocks and Cubes
- Doming/Dapping Block Sets
- Disc Cutting Sets
- Bezel Blocks
- Bench Blocks and Accessories
- Bangle Stretcher
- Bangle Mandrels
- Packaging, Displays, Labels & Tags
- Pearl Equipment
- Plating & Colouring
- Pliers and Cutters
- Polishing
- Reamers and Broaches
- Ring Tools
- Rolling Mills
- Safety
- Sawblades & Sawframes
- Scissors & Shears
- Setting Tools
- Soldering Tools & Accessories
- Stamps and Stamping Tools
- Testing Tools & Supplies
- Torches, Burners, & Accessories
- Tumblers
- Tweezers & Tongs
- Vices
- Watch Supplies and Tools
- Wax & Wax Working Tools
- Wire Drawing
-
Abrasives
- Refining & Scrap
- Fabricated Metal
- Bullion
- CAD Services
- Laser Engraving
- Castings & CAD
- Findings
- Finished Jewellery
- Gift Vouchers
Emery or Sanding Sticks
Emery and sanding sticks provide controlled hand finishing for jewellery and small metalwork. Choose grades from 4/0 (finest) to 4 (coarsest), with felt and chamois hand buffs alongside them for hand polishing and finishing.
Controlled Finishing by Hand
Sanding sticks give you a supported abrasive surface for smoothing file marks and refining accessible areas. Working by hand lets you control where material is removed, helping you preserve flat surfaces, edges and detail. Choose a stick profile that suits the area being finished.
Choosing an Emery Grade
In this range, 4/0 is the finest grade and 4 is the coarsest. Start with the least coarse grade that will remove the marks present, then work towards finer grades as required. Remove the scratches from each stage before moving to the next, and clear abrasive debris from the work between grades.
Felt and Chamois Hand Buffs
The felt and chamois hand buffs offer hand polishing options after abrasive preparation. The felt hand buff has hard felt mounted on a wooden handle for cleaning, polishing and finishing. Select a suitable polishing compound for your material and the finish required, following the compound instructions.
Keep separate hand buffs for different polishing compounds, especially between cutting and final polishing stages. Keep them clean and away from loose sanding grit to reduce the risk of scratching the prepared surface.
Preparing for Polishing
Hand polishing works best on a surface that has already been prepared with suitable abrasives. Check the work under good lighting as you progress rather than relying on polishing to remove deeper file or sanding marks.