Additional Fabricated Metal Services

Regal can supply fabricated wire fully annealed or hard, and can do basic coiling of bangle wire. Request these services in the Notes field for the item you’re ordering.

Annealed or Hard Wire

Choose the wire condition to suit what the finished piece needs to do. Fully annealed wire bends and forms with less effort. Hard wire takes more force to bend and has more springback, but better resists bending out of shape in use.

Hard Wire for Earring Posts and Hooks

0.8 or 0.9 mm hard round wire is a good starting point for earring posts and handmade ear hooks. Posts need enough stiffness to stay straight as the backing is fitted and removed. Hooks need to keep their curve during wear. Use smooth-jaw pliers or a mandrel to form hooks, and round and polish the ends. For posts, check that the diameter suits the backing you plan to use. If you solder the posts on, keep in mind that the heat can soften the wire.

Fully Annealed Wire for Forming

Choose fully annealed wire for tight bends, spirals, coils, wire weaving or wrapping around stones and other components. It is also useful when forming bangle wire around a mandrel, especially with thicker profiles that take more effort to bend. Soft wire can bend out of shape more readily in use, so choose hard wire when the finished part needs to stay stiff.

Write “fully annealed” or “hard” in the item Notes when ordering. Either condition is available at no charge.

Basic Coiling for Bangle Wire

Basic coiling of bangle wire is available at no charge. Request it in the item Notes and include the coil size you need. If you need a particular shape or finish, check with the metal team before ordering.

Cutting and Further Processing

Cutting charges apply when multiple pieces are cut from the same base stock. Online estimates exclude applicable cutting and further processing charges. Contact us by phone and ask for the metal team to confirm availability and costs for any additional work before submitting your order.

Where to Put Your Instructions

Enter processing instructions in the Notes field on each individual product page. These notes go to the fabrication team for that item. The Other Requirements field at checkout does not pass instructions to the individual production job.

Go to Fabricated Ordering or choose a plate, sheet, strip or wire order form.