Chenier Table
Round Chenier – Precision-Made Hollow Tube for Jewellery Making.
Regal have a range of tube or chenier available in many popular sizes and alloys.
Round chenier is perfect for projects where a clean, even hollow form is essential:
- Making hinges for lockets, boxes, bangles and bracelets
- Tube-style earring studs and hoops
- Lightweight pendants and design elements
- Clean and precise settings for stones or embellishments
- Mechanical jewellery parts requiring smooth movement
Available in up to 500mm lengths,
Sterling tubes have a minimum cut length of 100mm
Cutting charge will apply for multiple orders from the same base stock.
No weight indicates option is not available.
**Please note Sterling Silver has a minimum 100mm cut length**
Round Profile
| ROUND approximate weights per 500mm length **Please note STG minimum 100mm** |
|||||||
|---|---|---|---|---|---|---|---|
| O.D. (mm) | I.D. (mm) | WALL (mm) | PLATINUM 950 |
18ct YELLOW |
18ct WHITE M |
9ct YELLOW |
STG SILVER |
| 12.0 | 10.0 | 1.0 | 179.7 | ||||
| 10.0 | 8.0 | 1.0 | 147.1 | ||||
| 10.0 | 9.0 | 0.5 | 77.6 | ||||
| 8.0 | 6.0 | 1.0 | 114.4 | ||||
| 8.0 | 7.0 | 0.5 | 61.3 | ||||
| 7.0 | 5.0 | 1.0 | 145.2 | ||||
| 6.0 | 4.0 | 1.0 | 121.0 | 124.1 | 81.7 | ||
| 6.0 | 5.0 | 0.5 | 87.7 | 66.5 | 68.3 | 48.1 | 45.0 |
| 5.0 | 3.0 | 1.0 | 96.8 | 99.3 | |||
| 5.0 | 4.0 | 0.5 | 71.8 | 54.5 | 55.9 | 39.4 | 36.8 |
| 4.0 | 2.0 | 1.0 | 72.6 | 76.8 | |||
| 4.0 | 3.0 | 0.5 | 55.8 | 42.4 | 43.5 | 30.6 | 28.6 |
| 3.0 | 2.0 | 0.5 | 39.9 | 30.3 | 31.1 | 21.9 | 20.4 |
| 2.0 | 1.0 | 0.5 | 23.9 | 18.2 | 18.6 | 13.1 | 12.3 |
| 1.5 | 0.9 | 0.3 | 8.7 | 9.0 | 6.3 | 5.9 | |
Square Profile
| SQUARE approximate weights per 500mm length **Please note STG minimum 100mm** |
|||||||
|---|---|---|---|---|---|---|---|
| O.D. (mm) | I.D. (mm) | WALL (mm) | PLATINUM 950 |
18ct YELLOW |
18ct WHITE M |
9ct YELLOW |
STG SILVER |
| 6.0 | 5.0 | 0.5 | 84.7 | 86.9 | 57.2 | ||
| 5.0 | 4.0 | 0.5 | 69.3 | 71.1 | 46.8 | ||
| 4.0 | 3.0 | 0.5 | 53.9 | 55.3 | 36.4 | ||
| 3.0 | 2.0 | 0.5 | 38.5 | 39.5 | 26.0 | ||
How to estimate
The above table has the weight per 500mm stock piece. Divide the weight above by 500 and multiply by your desired length to get the approximate cut weight, or use the ordering page to have this done for you.
To Order
Please open the Fabricated Metal Catalogue to see ordering options
If you are manually ordering please state the following:
- Product code -or- chenier shape, ID, OD and alloy
- required length (in mm)