Super Pike Sawblades
Scies Miniatures Sarl in Vallorbe, sole manufacturer in Switzerland of "filed" jewelers' saws, is proud to present, the SUPER PIKE® blades. Based on the PIKE® blades, the SUPER PIKE® was developed using an optimized heat treatment process to reach a maximum level of performance.
This new addition complements the already proven quality of our blades, the result of half a century of manufacturing experience. The hands-on knowledge and expertise of our skilled staff prevail over modern 21st technology.
Try out our SUPER PIKE® blade for a personal feel of its exceptional quality.
- Shape: Round Back
- Blade Length: 130mm.
Sawblade size table
(Smallest to largest order)
| Size | Thickness x Width (mm) | Teeth per cm |
| 8/0 | 0.32 x 0.16 | 33 |
| 6/0 | 0.36 x 0.18 | 30 |
| 5/0 | 0.40 x 0.20 | 26 |
| 4/0 | 0.44 x 0.22 | 25 |
| 3/0 | 0.48 x 0.24 | 22 |
| 2/0 | 0.52 x 0.26 | 21 |
| 0 | 0.58 x 0.28 | 20 |
| 1 | 0.63 x 0.30 | 19 |
| 2 | 0.70 x 0.34 | 17 |
| 3 | 0.74 x 0.36 | 16 |
| 4 | 0.80 x 0.38 | 15 |
| 5 | 0.85 x 0.40 | 14 |
| 6 | 0.94 x 0.43 | 13 |
Choosing the sawblade size
Most work will be done with 2/0 or 0 size sawblades. Smaller sizes are generally used for intricate piercing work, and larger sizes are used for heavy work such as sprue removal or thick plate.
Pack Sizes
Sawblades are supplied in either a dozen, which is 12 blades bundled up with a wire, or a gross which is 12 of the dozens in a plastic or paper pouch for a total of 144 blades.
**Please note, the Super Pike blades replace the previous Glardon-Vallorbe sawblades, stock may vary as old stock is depleted**
| Code | Description | Add | |
|---|---|---|---|
| SB6 | Saw Blades Super Pike Size 6 | Login | |