Original Bead Crimper.
For beads from 2 to 3 mm which works with either tube crimps or round crimps.
We recommend that you use round (spherical) crimps if the crimp is going to be hidden as they hold better than tube crimps.
Tube crimps are more attractive when they are to be seen.
For best results only high quality crimps should be used.
Pliers Crimp Forming.
Create perfect crimps every time! Flat nose pliers only crush crimp beads, leaving sharp edges, but the "Crimping Plier" actually creates smooth, rounded crimps every time. A special two-step process allows the plier to first separate the crimp into two sections, securing each of your threads, and then crush the crimp to ensure the tightest crimp possible. Now available in 3 different styles to accommodate different crimp bead sizes. Each plier measures approximately 5-1/8 inches.
The Micro Crimper is also an adaptation of the Original Crimper to be used with 1mm size crimps.
It too has precision ground jaws which are slightly thinner for the smaller crimps which have become popular with the introduction of finer wire.
Length is 5-1/2" (130 mm).
The Mighty Crimper was developed for larger beads of 3mm diameter and is exceptionally handy for closing crimp ends eyelet ends cap end pinch clasps and crimp covers.
Because of the rounded jaws it will leave no marks or flat spots. Because of its larger size the Mighty Crimper is made of slightly thicker steel giving it 2.2mm wide jaws which are precision milled.
Length is 5-1/2" (130 mm).