Choosing A Torch

Soldering, annealing and melting place different demands on a jewellery torch. Choose around the work you do, the size of the pieces you heat and the gas supply your workspace can accommodate.

For fine repairs, start with the Little Torch. For general bench soldering and annealing, consider the Orca. For portability, consider a self-contained handheld torch, such as the Stingray or Blazer Big Shot.

Compare Our Three Torch Options

Little Torch jewellery torch

Little Torch

Precision And Concentrated Heat

Orca jewellery torch

Orca

General Soldering And Annealing

Stingray jewellery torch

Handheld Torch

Portable And Self-Contained
Stingray shown; Blazer Big Shot also available

CompareSmith Little TorchOrcaHandheld Torch
Fuel supplyOxygen plus a compatible fuel gas, such as LPG or acetyleneLPG; draws oxygen from the surrounding airRefined butane in an integral refillable tank
Best Suited ToFine soldering, precise repairs and work requiring concentrated heatGeneral soldering and annealing at a jewellery benchPortable soldering and heating; choose the model to suit the size of the job
Flame And TipsInterchangeable tips for fine work; dedicated heating/melting tips availableThree interchangeable tips; a broader flame than the finest Little Torch tipsFixed burner; flame size and heating capacity vary by model
SetupTwo gas supplies, suitable regulators and protective equipment (flashback arrestors)One LPG cylinder, hose and the correct cylinder valve/connectionSelf-contained; no external cylinder or hose during use
Main Trade-OffHigher initial setup cost and ongoing gas-supply costsLess concentrated heat and less scope for precision repairs or meltingHeating capacity and run time vary by model; refill cans can cost more for sustained use

Smith Little Torch: Precision And Concentrated Heat

The Little Torch combines bottled oxygen with a compatible fuel gas. Its small interchangeable tips provide a fine, concentrated flame for delicate soldering and repairs, including work close to existing solder joints. Accurate heat placement is useful for tasks such as claw re-tipping, although it does not remove the need to protect nearby stones and joints.

A suitable heating or melting tip extends its use to small melts. Match the tip to the fuel gas: LPG and acetylene setups do not necessarily use the same melting tip.

This is the most involved setup of the three. Budget for the torch, oxygen and fuel supplies, suitable regulators, hoses and compatible flashback protection. Cylinder rental or exchange charges depend on your gas supplier; an owned LPG bottle can avoid fuel-cylinder rental, but the oxygen supply still needs to be arranged.

Shop Smith Little Torch Kit | Little Torch Tips And Accessories

Orca: General Soldering And Annealing

The Orca runs on LPG and draws air into the flame, so it does not need a separate oxygen cylinder. Its three interchangeable tips provide a choice of flame sizes for general jewellery soldering and annealing.

The Regal Orca kit uses the supplied cylinder valve and hose connection rather than a separate conventional LPG regulator. It is supplied for a small LPG camping bottle; a compatible adaptor is required for a conventional 9 kg BBQ-style bottle. Confirm the actual bottle connection before ordering.

Its broader flame is useful for heating an area evenly, but offers less localised heat than the finest Little Torch tips. It is less suited to claw re-tipping or work close to joints that must remain cool. Its lower flame temperature and limited concentrated heat also restrict high-temperature work and melting applications.

Shop Orca Torches, Tips And Adaptors | View Orca Torch

Handheld Torches: Portable And Self-Contained

Self-contained handheld torches, including the Stingray and Blazer Big Shot, carry their fuel in a refillable tank within the torch. With no external hose or cylinder connected during use, they are convenient for a shared bench, garage workspace or a setup that needs to pack away between jobs.

These torches are not all the same size or capacity. Compare the flame range, fuel capacity and run time of each model against your work. The Stingray offers a compact option; the Blazer Big Shot provides another handheld choice to consider. Choose around the heat needed for your typical pieces rather than portability alone.

Use the refined butane specified by the manufacturer. For the Stingray, use refillable cigarette-lighter grade butane rather than camping-stove gas. Small refill cans can be relatively expensive for sustained use compared with bulk LPG.

A fixed burner offers less scope to change the flame shape than a torch with interchangeable tips. Flame adjustment and heating capacity vary between models, so the limitations of a compact Stingray should not be assumed to apply equally to every handheld torch.

Compare Handheld Torches: Stingray And Blazer Big Shot | View Stingray Torch

Match The Heat To The Job

Flame temperature alone does not tell you how large a job a torch can handle. Flame size, heat output, metal type and the mass of the workpiece all matter. A tiny hot flame can be excellent for a small joint yet struggle to heat a large piece evenly; a broader flame can be useful for annealing.

If melting is a regular requirement, tell us the metal and the quantity you intend to melt before choosing a torch. A soldering setup should not be assumed to provide the capacity needed for larger melts.

Soldering Kits To Extend Your Basic Tool Kit

Our two soldering kits are designed to add basic soldering capabilities to the Beginners Tool Kit (MI10015). Start with the basic hand tools, then add the soldering kit that suits your workspace and preferred fuel supply. If you do not already have the basic kit or equivalent tools, you may need additional items.

Both kits include supporting soldering tools such as flux, tweezers, a solder pick, binding wire, pickling compound, a soldering board and a third-hand holder. Choose between the Orca setup for general bench work and the self-contained Stingray for portability.

Soldering Kit With Orca Torch

Soldering tool kit with Orca torch and supporting tools

Adds an LPG-powered Orca torch with three tips and supporting soldering tools. Suits a dedicated bench for general soldering and annealing. The current kit also lists a POL-to-Companion cylinder adaptor; check your LPG bottle connection.

View Orca Soldering Kit (MI10020)

Soldering Kit With Stingray Torch

Soldering tool kit with Stingray torch and supporting tools

Adds a refillable Stingray butane torch and supporting soldering tools. Suits small jobs and a shared workspace that needs to pack away. The torch requires refined lighter-grade butane.

View Stingray Soldering Kit (MI10030)

Solder is ordered separately from our fabricated metal team. Contents can change with tool availability; review the current product parts lists before ordering.

Choosing Your Complete Setup

Consider the full setup cost as well as fuel and cylinder charges over time. Check what each kit includes and what must be purchased separately. Use the cylinder connections, regulators and protective equipment specified for the particular torch and gas combination.

For an Orca or Stingray with supporting soldering tools, browse our Soldering Kits. For help selecting a torch, contact us with the metals you use, the typical size of your work and your available gas supply.