Hammer Handpieces

Hammer handpieces deliver a tapping or reciprocating action for stone setting, decorative hammering and engraving. Compare impact adjustment, connection types and the operating limits stated in their product listings.

For drilling, cutting, grinding and polishing with rotating accessories, see our Rotary Handpieces guide.

Check the handpiece connection, accessory size and compatible drive before ordering. European slip joint and US/Foredom Quick Disconnect connections are not interchangeable. Micromotor replacement handpieces are listed separately below.

For help identifying the shaft connection, including the differences between US Connection and European Slip Joint, see our Handpiece Connections guide.

For the Foredom #15 hammer handpieces, the Foredom LX low-speed, high-torque motor (MO3100) is a particularly suitable choice. Its maximum speed is 5,000 rpm, matching the handpieces' operating limit. Check the shaft connection before selecting a motor and handpiece combination.

Handpiece Comparison

Browse all Hammer Handpieces in the catalogue.

The comparison uses information currently supplied in the product listings. “Not specified” indicates that the listing does not give that detail. Motor rpm and hammer strokes per minute are different measurements. The micromotor replacement uses its own system rather than a flexible-shaft coupling, it is electrical not mechanical like the other handpieces.

Handpiece Coupling Action / Adjustment Speed / Rate
HP1120 — GD Hammer Handpiece - US Foredom connection US Connection Heavy to medium/fine adjustment Not specified
HP1100 — CDG GD Hammer Handpiece - European connection. European Slip Joint Heavy to medium/fine adjustment Not specified
HP2050 — Handpiece Faro Hammer European Slip Joint Percussive force adjusted by toothed wheel Up to 4,000 strokes/min
HP3150 — Foredom Hammer Handpiece # 15 US Connection Adjustable light-to-heavy impact; 0.8 mm stroke 5,000 rpm motor speed maximum
HP3155 — Foredom Hammer Hand Piece #15 Duplex Shaft US Connection with Duplex Adjustable light-to-heavy impact; 0.8 mm stroke 5,000 rpm motor speed maximum
HP3200 — Foredom Hammer Handpiece # 15 Slip Joint European Slip Joint Adjustable light-to-heavy impact; 0.8 mm stroke 5,000 rpm motor speed maximum
MO108023 — Foredom Handpiece Only - Hammer Micro Motor Hammer Micromotor Hammer action Not specified

GD Hammer Handpiece - US Foredom connection

GD Hammer Handpiece - US Foredom connection HP1120

Product Code: HP1120

View Product and Current Pricing

Adjustment from heavy to medium/fine can be made.

Supplied with two hammering points which can be shaped to suit the application required.

US ball bearing connection

Specifications

  • Connection / System: US ball bearing
  • Action / Adjustment: Heavy to medium/fine adjustment
  • Features / Inclusions: Two shapeable hammering points included

CDG GD Hammer Handpiece - European connection.

CDG GD Hammer Handpiece - European connection. HP1100

Product Code: HP1100

View Product and Current Pricing

Adjustment from heavy to medium/fine can be made.

Supplied with two hammering points which can be shaped to suit the application required.

European slipjoint connection

Specifications

  • Connection / System: European slip joint
  • Action / Adjustment: Heavy to medium/fine adjustment
  • Features / Inclusions: Two shapeable hammering points included

Handpiece Faro Hammer

Handpiece Faro Hammer HP2050

Product Code: HP2050

View Product and Current Pricing

The FARO hammer hand-piece is available in slip joint attachment only. The FARO hammer hand-piece is very robust despite its size and shape.

The hand-piece has a diameter of only 19.5mm.

It is possible to increase or reduce the percussive force by simply rotating a toothed gearing wheel.

The FARO hammer hand-piece are supplied with a conical striking tip 31 mm long and 2.5mm in diameter. A cylindrical tip with a 4.5mm diameter is also available.

Max number of strokes transmittable 4000 per minute.

Specifications

  • Connection / System: Slip joint
  • Action / Adjustment: Percussive force adjusted by toothed wheel
  • Speed / Rate: Up to 4,000 strokes/min
  • Dimensions / Weight: 19.5 mm body diameter
  • Features / Inclusions: Conical tip: 31 mm long × 2.5 mm diameter; optional 4.5 mm cylindrical tip

Foredom Hammer Handpiece # 15

Foredom Hammer Handpiece # 15 HP3150

Product Code: HP3150

View Product and Current Pricing

Foredom hammer handpiece with a reciprocating action for stone setting, decorative hammering and texturing in jewellery work.

The impact force is adjustable from light to heavy using the knurled adjustment ring. The handpiece has a stroke of approximately 0.8 mm and is supplied with a replaceable steel anvil point.

Designed for US Connection flexible shaft systems. Operates at low speeds and requires periodic lubrication.

Comes with an anvil point. Hammer has 1/32" stroke and its impact can be adjusted from light to heavy.

Optional points are available: Pavé Point (R15PT, Regal HP3177).

Do not exceed 5,000 rpm during normal operation.

Specifications

  • Connection: US Connection
  • Action: Reciprocating hammer
  • Impact Adjustment: Light to heavy
  • Stroke Length: 0.8 mm (0.031 in)
  • Maximum Operating Speed: 5,000 rpm
  • Length: 159 mm (6.25 in)
  • Tip Diameter: 6.4 mm (0.25 in)
  • Weight: Approximately 104 g
  • Included: Steel anvil point
  • Maintenance: Lubricate every 10 hours of use

Foredom Hammer Hand Piece #15 Duplex Shaft

Foredom Hammer Hand Piece #15 Duplex Shaft HP3155

Product Code: HP3155

View Product and Current Pricing

Foredom hammer handpiece with a Duplex spring extension for increased flexibility and precise control during stone setting, decorative hammering and detailed jewellery work.

Uses the same adjustable reciprocating hammer mechanism as the standard #15 handpiece, with a stroke of approximately 0.8 mm. Impact force can be adjusted from light to heavy using the knurled adjustment ring.

The Duplex spring allows the handpiece to be positioned more freely relative to the flexible shaft. However, the spring is subject to breakage and is recommended for experienced operators whose work requires the additional flexibility.

Optional points are available: Pavé Point (R15PT, Regal HP3177).

Designed for US Connection flexible shaft systems with a Duplex spring extension. Requires periodic lubrication.

Do not exceed 5,000 rpm during normal operation.

Specifications

  • Connection: US Connection with Duplex
  • Action: Reciprocating hammer
  • Impact Adjustment: Light to heavy
  • Stroke Length: 0.8 mm (0.031 in)
  • Maximum Operating Speed: 5,000 rpm
  • Length: Approximately 244 mm (9.625 in)
  • Tip Diameter: 6.4 mm (0.25 in)
  • Weight: Approximately 147 g
  • Included: Steel anvil point
  • Maintenance: Lubricate every 10 hours of use

Foredom Hammer Handpiece # 15 Slip Joint

Foredom Hammer Handpiece # 15 Slip Joint HP3200

Product Code: HP3200

View Product and Current Pricing

Foredom hammer handpiece with a reciprocating action for stone setting, decorative hammering and texturing in jewellery work.

Features adjustable impact force from light to heavy using the knurled adjustment ring, with a stroke of approximately 0.8 mm. Supplied with a replaceable steel anvil point.

Designed specifically for European Slip Joint flexible shaft systems. Not interchangeable with standard US Connection handpieces.

Optional points are available: Pavé Point (R15PT, Regal HP3177).

Requires periodic lubrication.

Do not exceed 5,000 rpm during normal operation.

Specifications

  • Connection: European Slip Joint
  • Action: Reciprocating hammer
  • Impact Adjustment: Light to heavy
  • Stroke Length: 0.8 mm (0.031 in)
  • Maximum Operating Speed: 5,000 rpm
  • Length: 143 mm (5.625 in)
  • Tip Diameter: 6.4 mm (0.25 in)
  • Weight: Approximately 101 g
  • Included: Steel anvil point
  • Maintenance: Lubricate every 10 hours of use

Foredom Handpiece Only - Hammer Micro Motor

Foredom Handpiece Only - Hammer Micro Motor MO108023

Product Code: MO108023

View Product and Current Pricing

Contact us for further product details.

Specifications

  • Connection / System: Hammer micromotor replacement
  • Action / Adjustment: Hammer action
  • Features / Inclusions: Handpiece only

Related Products and Guides

Help Choosing a Handpiece

For help matching a handpiece to your motor and jewellery work, Contact Us online, Ph 0800 881 888 or 09 638 7378.