Rotary Handpieces

Rotary handpieces hold and rotate burs, drills, mounted abrasives and polishing accessories for jewellery work. Compare quick-change, collet and adjustable-chuck designs, together with the connections and tool sizes stated in their product listings.

For stone setting and other work that needs a tapping action, see our Hammer Handpieces guide.

Check the handpiece connection, accessory size and compatible drive before ordering. European slip joint and US/Foredom Quick Disconnect connections are not interchangeable. Micromotor replacement handpieces are listed separately below.

For help identifying the shaft connection, including the differences between US Connection and European Slip Joint, see our Handpiece Connections guide.

Handpiece Comparison

Browse all Rotary Handpieces in the catalogue.

Compare each handpiece’s coupling, tool-holding method and compatible shank sizes below. The 1070 replacement handpiece uses its own micromotor system rather than a flexible-shaft coupling.

HandpieceCouplingTool Holding And Shank Capacity
HP1050 — Handpiece T/30 AMERICANO (US connection)US ConnectionLever quick change; 2.35 mm only
HP1060 — Handpiece GD "Silver"European Slip Joint2.35 mm collet
HP1080 — Handpiece GD "Industrial" I/52US Connection2.35 mm, 3 mm, 4 mm and 6 mm collets
HP3500 — Foredom Handpiece # 52US ConnectionPush/pull quick change; 2.35 mm only
HP1000 — Handpiece T/30 Slip Joint (European connection)European Slip JointLever quick change; 2.35 mm only
HP2000 — Handpiece Faro Slip JointEuropean Slip JointLever quick release; 2.35 mm only
HP3100 — Foredom Handpiece # 10 DuplexUS Connection with DuplexNo. 10 with duplex spring; 2.35 mm only
HP3050 — Foredom Handpiece # 10 USUS ConnectionRotating lever quick change; 2.35 mm only
HP3400 — Foredom Handpiece # 28US Connection2.35 mm / 3.18 mm collets
HP3450 — Foredom Handpiece # 28 Slip JointEuropean Slip Joint2.35 mm / 3 mm collets
HP3300 — Foredom Handpiece # 30US Connection#0 geared 3-jaw Jacobs chuck; Up to 4 mm
HP3350 — Foredom Handpiece # 30 Slip JointEuropean Slip JointGeared 3-jaw Jacobs chuck; 0–4 mm
HP3550 — Foredom Handpiece # 52 Slip JointEuropean Slip JointPush/pull quick change; 2.35 mm only
HP3000 — Foredom Handpiece #8 USUS Connection2.35 mm / 3.18 mm collets
HP3020 — Foredom Handpiece #8D DuplexUS Connection with DuplexCollet chuck; duplex spring; 2.35 mm / 3.18 mm collets
HP3010 — Foredom Handpiece #8 Slip JointEuropean Slip Joint2.35 mm / 3.18 mm collets
HP3301 — Grobet #30 Adjustable HandpieceUS ConnectionAdjustable chuck; 0–4 mm (0–0.156 in)
HP1160 — Hand Piece CDG T/30 DuplexUS Connection with Duplex2.35 mm collet
MO107023 — Foredom Handpiece Only - 1070 Micro Motor1070 Micromotor2.35 mm only

What Does A Duplex Spring Do?

A duplex spring adds a short flexible drive section at the rear of the handpiece. It allows the handpiece to move more freely relative to the main flexible shaft, giving added manoeuvrability when positioning a bur for delicate or detailed work.

The spring transmits rotation while allowing this extra movement. It does not change the handpiece’s collet or chuck capacity; choose the correct shank size and coupling as usual. Examples on this page include HP3100 Foredom #10 Duplex, HP3020 Foredom #8D Duplex and HP1160 CDG T/30 Duplex.

Duplex springs are subject to wear and breakage. Foredom recommends these handpieces for experienced flexible-shaft users who need the added flexibility; the duplex spring requires periodic lubrication in accordance with the manufacturer’s instructions. For most users, a handpiece without a duplex spring is the simpler choice.

Handpiece T/30 AMERICANO (US connection)

Handpiece T/30 AMERICANO (US connection) HP1050

Product Code: HP1050

View Product and Current Pricing

Our most popular quick change handpiece.

Quick Change Hand-piece for use only with 2.35mm burs. A lever action on the the hand-piece body is all that is required to change accessories.

It has a moulded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication.

Exclusively for use with 2.35mm shank burs.

Specifications

  • Connection / System: US connection
  • Tool Holding: Lever quick change
  • Shank Capacity / Collets: 2.35 mm only
  • Features / Inclusions: Pre-lubricated ball bearings

Handpiece GD "Silver"

Handpiece GD "Silver" HP1060

Product Code: HP1060

View Product and Current Pricing

Contact us for further product details.

Specifications

  • Connection / System: European Slip Joint
  • Features / Inclusions: GD Silver
  • Shank Capacity / Collets: 2.35 mm collet

Handpiece GD "Industrial" I/52

Handpiece GD "Industrial" I/52 HP1080

Product Code: HP1080

View Product and Current Pricing

Contact us for further product details.

Specifications

  • Connection / System: US Connection
  • Features / Inclusions: GD Industrial I/52
  • Shank Capacity / Collets: 2.35 mm, 3 mm, 4 mm and 6 mm collets

Foredom Handpiece # 52

Foredom Handpiece # 52 HP3500

Product Code: HP3500

View Product and Current Pricing

Rapid Accessory Changing

These quick change handpieces have a unique
push/pull collet chuck release mechanism.
Wait for the motor, flexible shaft and accessory to come to
a full stop before opening the chuck. Then, pull the outer grip
forward with one hand while holding the back of the handpiece
with the other. Remove the accessory and insert the shank of the new one at least 1" (25mm) into the chuck.
Pull the grip all the way back until the chuck snaps closed.

https://www.foredom.net/wp-content/uploads/handpc_instructio ns/53_discontinued.pdf

Specifications

  • Tool Holding: Push/pull quick change
  • Features / Inclusions: Insert shank at least 25 mm; stop before changing

Handpiece T/30 Slip Joint (European connection)

Handpiece T/30 Slip Joint (European connection) HP1000

Product Code: HP1000

View Product and Current Pricing

Our most popular handpiece.

Quick Change Hand-piece for use only with 2.35mm burs. A lever action on the the hand-piece body is all that is required to change accessories.

It has a moulded plastic front grip with tapered sides for easy and close handling, plus pre-lubricated ball bearings that do not require additional lubrication.

Exclusively for use with 2.35mm shank burs.

Specifications

  • Connection / System: European slip joint
  • Tool Holding: Lever quick change
  • Shank Capacity / Collets: 2.35 mm only
  • Features / Inclusions: Pre-lubricated ball bearings

Handpiece Faro Slip Joint

Handpiece Faro Slip Joint HP2000

Product Code: HP2000

View Product and Current Pricing

Quick release lever allows rapid changing of all burs & accessories with 2.35 mm shanks.

Slim body for precise control.

Specifications

  • Connection / System: Slip joint
  • Tool Holding: Lever quick release
  • Shank Capacity / Collets: 2.35 mm
  • Features / Inclusions: Slim body

Foredom Handpiece # 10 Duplex

Foredom Handpiece # 10 Duplex HP3100

Product Code: HP3100

View Product and Current Pricing

Same as the No. 10, with the addition of a Duplex Spring.

For use only with 2.35mm burs.

The spring provides extra flexibility to the hand-piece. Duplex springs are subject to breakage.

We recommend that only experienced users of flex shaft tools whose work demands the added flexibility consider purchasing this style hand-piece.

For most users, the "straight" hand-piece is the preferable

Specifications

  • Connection / System: US Connection with Duplex
  • Tool Holding: No. 10 with duplex spring
  • Shank Capacity / Collets: 2.35 mm only
  • Features / Inclusions: Duplex spring; experienced users recommended

Foredom Handpiece # 10 US

Foredom Handpiece # 10 US HP3050

Product Code: HP3050

View Product and Current Pricing

No. 10 is a Quick Change Hand-piece featuring a slim grip and pre-lubricated ball bearings that do not require any lubrication.

For use with only 2.35mm burs. A rotating lever action is all that is required to change accessories.

Exclusively for use with 2.35mm shank burs.

Specifications

  • Connection / System: US connection
  • Tool Holding: Rotating lever quick change
  • Shank Capacity / Collets: 2.35 mm only
  • Features / Inclusions: Pre-lubricated ball bearings

Foredom Handpiece # 28

Foredom Handpiece # 28 HP3400

Product Code: HP3400

View Product and Current Pricing

Collet type chuck hand-piece with a slender, comfortable design and tapered grip.

Comes with 2.35mm and 3.18mm collets, pin and chuck wrench.

Connection: US Ball Bearing
Length: 133.5mm

Specifications

  • Connection / System: US ball bearing
  • Tool Holding: Collet chuck
  • Shank Capacity / Collets: 2.35 mm and 3.18 mm collets
  • Dimensions / Weight: 133.5 mm long
  • Features / Inclusions: Pin and chuck wrench included

Foredom Handpiece # 28 Slip Joint

Foredom Handpiece # 28 Slip Joint HP3450

Product Code: HP3450

View Product and Current Pricing

Slip joint connection for use with European-style flexible shaft machines. Comes with 2.35mm and 3mm collets.

This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.

Connection: European Slip Joint
Length: 133.5mm

Specifications

  • Connection / System: European slip joint
  • Tool Holding: Collet chuck
  • Shank Capacity / Collets: 2.35 mm and 3 mm collets
  • Dimensions / Weight: 133.5 mm long
  • Features / Inclusions: Not interchangeable with Quick Disconnect

Foredom Handpiece # 30

Foredom Handpiece # 30 HP3300

Product Code: HP3300

View Product and Current Pricing

Foredom's most popular hand-piece features a #0 geared 3-jaw Jacobs® Chuck.

It accepts any size accessory shank or drill bit up to 4mm.

Pre-lubricated ball bearings require no maintenance.

Comes with a ergonomic chuck key.

Connector: US Ball Bearing
Max Drill Size: 4mm

Specifications

  • Connection / System: US ball bearing
  • Tool Holding: #0 geared 3-jaw Jacobs chuck
  • Shank Capacity / Collets: Up to 4 mm
  • Features / Inclusions: Chuck key included

Foredom Handpiece # 30 Slip Joint

Foredom Handpiece # 30 Slip Joint HP3350

Product Code: HP3350

View Product and Current Pricing

Slip joint connection for use with European-style flexible shaft machines.

This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.

Specifications

  • Connection / System: European slip joint
  • Features / Inclusions: Not interchangeable with Quick Disconnect

Foredom Handpiece # 52 Slip Joint

Foredom Handpiece # 52 Slip Joint HP3550

Product Code: HP3550

View Product and Current Pricing

Slip joint connection for use with European-style flexible shaft machines.

This hand-piece is not interchangeable with Foredom "Quick Disconnect" style handpieces.

Length: 5-1/2"

Specifications

  • Connection / System: European slip joint
  • Dimensions / Weight: Approx. 140 mm long (5.5 in)
  • Features / Inclusions: Not interchangeable with Quick Disconnect

Foredom Handpiece #8 US

Foredom Handpiece #8 US HP3000

Product Code: HP3000

View Product and Current Pricing

Collet-type chuck hand-piece with slim design and chuck guard sleeve that protects fingers when working close and slides back when changing collets and accessories.

Comes with 2.35mm and 3.18mm collets, and set of chuck wrenches.

Specifications

  • Connection / System: US connection
  • Tool Holding: Collet chuck
  • Shank Capacity / Collets: 2.35 mm and 3.18 mm collets
  • Features / Inclusions: Sliding chuck guard; chuck wrenches included

Foredom Handpiece #8D Duplex

Foredom Handpiece #8D Duplex HP3020

Product Code: HP3020

View Product and Current Pricing

The Foredom Duplex Connection provides extra flexibility in the hand-piece itself where more precise control for delicate work is required.

The spring drive is of special steel, double wound, tubular construction and is protected by a flexible spring cover.

Collet-type chuck hand-piece with slim design and chuck guard sleeve that protects fingers when working close and slides back when changing collets and accessories.

Comes with 2.35mm and 3.18mm collets, and set of chuck

Specifications

  • Connection / System: US Connection with Duplex
  • Tool Holding: Collet chuck; duplex spring
  • Shank Capacity / Collets: 2.35 mm and 3.18 mm collets
  • Features / Inclusions: Sliding chuck guard

Foredom Handpiece #8 Slip Joint

Foredom Handpiece #8 Slip Joint HP3010

Product Code: HP3010

View Product and Current Pricing

Collet-type chuck hand-piece with slim design and chuck guard sleeve that protects fingers when working close and slides back when changing collets and accessories.

Comes with 2.35mm and 3.18mm collets, and set of chuck wrenches.

Specifications

  • Connection / System: Slip joint
  • Tool Holding: Collet chuck
  • Shank Capacity / Collets: 2.35 mm and 3.18 mm collets
  • Features / Inclusions: Sliding chuck guard; chuck wrenches included

Grobet #30 Adjustable Handpiece

Grobet #30 Adjustable Handpiece HP3301

Product Code: HP3301

View Product and Current Pricing

A popular hand-piece for all-around use.

Adjustable chuck accommodates shank sizes from 0 to 5/32" (4 mm).

Includes chuck key.

Specifications

  • Connection / System: US Connection
  • Tool Holding: Adjustable chuck
  • Shank Capacity / Collets: 0–4 mm (0–0.156 in)
  • Features / Inclusions: Chuck key included

Hand Piece CDG T/30 Duplex

Product image not available.

Product Code: HP1160

View Product and Current Pricing

Contact us for further product details.

Specifications

  • Connection / System: US Connection with Duplex
  • Features / Inclusions: CDG T/30 Duplex
  • Shank Capacity / Collets: 2.35 mm collet

Foredom Handpiece Only - 1070 Micro Motor

Foredom Handpiece Only - 1070 Micro Motor MO107023

Product Code: MO107023

View Product and Current Pricing

Replacement handpiece for the 1070 micromotor, for use with 2.35 mm shank accessories only.

Specifications

  • Connection / System: 1070 micromotor replacement
  • Features / Inclusions: Replacement handpiece only
  • Shank Capacity: 2.35 mm only

Related Products and Guides

Help Choosing a Handpiece

For help matching a handpiece to your motor and jewellery work, Contact Us online, Ph 0800 881 888 or 09 638 7378.